DA-2235 is our most powerful amplifier and is designed to drive our powerful sub bass systems. It is a dual channel and delivers an output of 2350 watts RMS per channel into 8 ohms and 7000 watts per channel into 2 ohms.
DA-4080 and DA-4130 are 4 channel amplifiers and can be used multifunctional. Together with our DSP system controller DSP 418 these amplifiers are base of efficient system applications and cover the entire range of required output power. DSP 418 comes with a full speaker library corresponding with our DA Amplifier range.
DA-2235 | DA-4080 | DA-4130 | |
---|---|---|---|
Output Power | 2 x 7000W @ 2Ohm 2 x 4400W @ 4Ohm 2 x 2350W @ 8Ohm | 4 x 2000W @ 2Ohm 4 x 1600W @ 4Ohm 4 x 800W @ 8Ohm | 4 x 2500W @ 2Ohm 4 x 2100W @ 4Ohm 4 x 1300W @ 8Ohm |
Distortion THD+N 1KHz@ 8Ohm 1/4 power | < 0,1% | < 0,1% | < 0,1% |
Frequency Response | 15Hz -35KHz | 15Hz -35KHz | 15Hz -35KHz |
Signal to Noise 20 Hz -20 kHz | >112 dBA | >112 dBA | >112 dBA |
Input Sensitivity | selectable 23dB ... 44dB | selectable 23dB ... 44dB | selectable 23dB ... 44dB |
Front Controls | Power switch, gain control | Power switch, gain control | Power switch, gain control |
Rear Controls | Sensitivity, Bridge | Sensitivity, Bridge | Sensitivity, Bridge |
Input Connectors | Power connector, XLR female, phönix sockets | Power connector, XLR female, phönix sockets | Power connector, XLR female, phönix sockets |
Output Connectors | speaker sockets | speaker sockets | speaker sockets |
Operating Voltage | 200V-240V 50-60Hz | 200V-240V 50-60Hz | 200V-240V 50-60Hz |
Dimensions | 19“/2U 425 mm deep | 19“/2U 425 mm deep | 19“/2U 425 mm deep |
Netweight | 21 Kg | 21 Kg | 21 Kg |